– The Single Cable Luber will give you a tighter hold on your cable. – Used to inject lubricant into cable housing – Clamps over housing and wire allowing an aerosol can to be connected – Once lube runs out the far end, the cable is lubricated – Use this handy tool to make it easier to spray cable lube in your cables.
In order to properly service your cables you will need a can of cable lube and a power subing tool. This tool is very easy to use and is a must for any do it your selfer. Nothing is worse than a cable snapping in the middle of a ride, Watch the videos below for more details
Hold and cover the cable firmly by special rubber and one-screw tighten vise design. Injecting the lubricant fluid into the cable housing in an easy way. Just put the straw of the lubricant into the injection hole and press the lubricant after tighten up the screw. Gently press and release the lubricant few times, the fluid will penetrate the whole cable and that will make the clutch operating smoothly. The metal cable will rust if it is not lubed. So always lubricate metal cables on your regular maintenance. Cable lubricator is a must-have tool to keep your cable lubricated. Can efficiently apply lubricant fluid to the cable.